RUN 1800/2500

Tuesday, 01 January 2019 11:48 Written by 
Rate this item
(0 votes)

For sliding gates weighing up to 1800 kg (RUN1800) and up to 2500 kg (RUN2500). Ventilated motor with inductive limit switch (RUN1800P/RUN2500P) or electromechanical limit switch (RUN1800/RUN2500I/RUN2500).

Suitable to operate in extreme conditions, in systems

for intensive use.

Simple to install: the BlueBUS system enables connections

by means of just two wires between the control unit

and up to 15 control safety and signalling devices.

Safe: the acceleration settings (at the start of the manoeuvre)

and the deceleration settings (at the end of the manoeuvre)

are precise and reliable.

The temperature sensor: Run is able to manage force, adapting

it to the different climatic and environmental conditions,

while adapting the thermal cut-out protection and intensity

of self-ventilation, depending on the temperature reading.

A master/slave selection also automatically synchronises

2 motors, enabling the automation of sliding gates with two

opposing leaves.

Practical and functional: the control unit (and inverter

on version RUN2500I), housed inside Run, can be simply

connected by means of the practical connector guide.

Very quiet: gear motor on bearings.

RUN2500I version with built-in inverter

Perfect movement: the inverter enables the power supply

and drive of the 3-phase motor with single-phase current

at 230 Vac, acting on the frequency to adjust speed

of the automation from a minimum of 8.2 m/min to maximum

15.4 m/min.

In the automation deceleration phase, the inverter, which

dialogues with the control unit, increases the torque, thus

improving performance and reducing the risk of the automation

 

blocking on impact with obstacles.

Read 1197 times Last modified on Tuesday, 01 January 2019 12:09
More in this category: « RUN 1500 TUB 3500 »