For hi-speed automation of sliding gates
weighing up to 250 kg (RB250HS) and up to
500 kg (RB500HS), for residential
and industrial applications.
24 Vdc electromechanical gear motor.
Ideal for intensive use, opening a 4 m
gate takes around 10* seconds with RB250HS
and around 9* seconds with RB500HS.
User-friendly: thanks to the Nice BlueBUS technology,
the control unit can be connected to up to seven couples
of photocells, control, security and signalling devices,
using two wires only.
Practical: the control unit and PS124 buffer battery (optional)
can be connected by means of a simple connector
and can be housed directly inside Robus.
Advanced: the temperature sensor adapts the motor power
to the climatic conditions and at the same time thermal cut-out.
A master/slave selection automatically synchronises two motors.
This means it is possible to automate 2-leaf sliding gates set
opposite each other.
Intelligent: thanks to the obstacle detection system
and automatic programming of the working times. Self-diagnosis
by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted
at the beginning and at the end of each opening
and closing manoeuvre.
Sturdy: base and release in pressure die cast
with easy to open handle.
Very quiet: gear motor on bearings.
* Considering standard installation, excluding acceleration